Sulky VISION 2 DPB Manual de usuario descargar pdf (Pagina 37)

•

• Select the EPAN menu

•

• Check that: • the fertiliser selection is correct,

• the hydraulic shutters are closed.

•

• Select and carry out the stationary test.

•

• Select the application rate/ha:

use the numeric pad and confirm by pressing .

•

• You are spreading in DPA mode.

You can adjust the application rate/ha: select or and return to baseline flow rate by selecting .

•

• You can start the TRIBORD or select to adjust the RH side or select to adjust the LH side.

Return to the same left/right application rate by selecting .

ise en route

Start-up

Inbetriebsetzung

•

• Select the REG menu.

•

• Make sure that all parameters are correctly entered and saved: rate coefficient and working width .

•

• Select your fertilisers

•

• Select the INFO menu.

•

• Select the PAR/TOT mode.

•

• Reset each counter to zero with the RAZ function.

•

• As soon as you hear an alarm sound or see a bell appear on the screen, select to determine the cause[s].

Select OK to return to the baseline menu.

•

• Select

to save.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 50 51

Sin comentarios

Sulky VISION 2 DPB Manual de usuario Pagina 37